config/ap/add_ap.sh

@@ -1,7 +0,0 @@
-#!/bin/bash
-#
-sudo nmcli con add con-name hotspot ifname wlan0 type wifi ssid "AGENT_GSM"
-#sudo nmcli con modify hotspot wifi-sec.key-mgmt wpa-psk
-#sudo nmcli con modify hotspot wifi-sec.psk "159357159357"
-sudo nmcli con modify hotspot 802-11-wireless.mode ap 802-11-wireless.band bg ipv4.method shared ipv6.method shared
-

config/ap/etc/default/hostapd

@@ -0,0 +1,23 @@
+# Defaults for hostapd initscript
+#
+# WARNING: The DAEMON_CONF setting has been deprecated and will be removed
+#          in future package releases.
+#
+# See /usr/share/doc/hostapd/README.Debian for information about alternative
+# methods of managing hostapd.
+#
+# Uncomment and set DAEMON_CONF to the absolute path of a hostapd configuration
+# file and hostapd will be started during system boot. An example configuration
+# file can be found at /usr/share/doc/hostapd/examples/hostapd.conf.gz
+#
+DAEMON_CONF="/etc/hostapd/hostapd.conf"
+
+# Additional daemon options to be appended to hostapd command:-
+# 	-d   show more debug messages (-dd for even more)
+# 	-K   include key data in debug messages
+# 	-t   include timestamps in some debug messages
+#
+# Note that -B (daemon mode) and -P (pidfile) options are automatically
+# configured by the init.d script and must not be added to DAEMON_OPTS.
+#
+#DAEMON_OPTS=""

config/ap/etc/dhcpcd.conf

@@ -0,0 +1,64 @@
+# A sample configuration for dhcpcd.
+# See dhcpcd.conf(5) for details.
+
+# Allow users of this group to interact with dhcpcd via the control socket.
+#controlgroup wheel
+
+# Inform the DHCP server of our hostname for DDNS.
+hostname
+
+# Use the hardware address of the interface for the Client ID.
+clientid
+# or
+# Use the same DUID + IAID as set in DHCPv6 for DHCPv4 ClientID as per RFC4361.
+# Some non-RFC compliant DHCP servers do not reply with this set.
+# In this case, comment out duid and enable clientid above.
+#duid
+
+# Persist interface configuration when dhcpcd exits.
+persistent
+
+# Rapid commit support.
+# Safe to enable by default because it requires the equivalent option set
+# on the server to actually work.
+option rapid_commit
+
+# A list of options to request from the DHCP server.
+option domain_name_servers, domain_name, domain_search, host_name
+option classless_static_routes
+# Respect the network MTU. This is applied to DHCP routes.
+option interface_mtu
+
+# Most distributions have NTP support.
+#option ntp_servers
+
+# A ServerID is required by RFC2131.
+require dhcp_server_identifier
+
+# Generate SLAAC address using the Hardware Address of the interface
+#slaac hwaddr
+# OR generate Stable Private IPv6 Addresses based from the DUID
+slaac private
+
+# Example static IP configuration:
+#interface eth0
+#static ip_address=192.168.0.10/24
+#static ip6_address=fd51:42f8:caae:d92e::ff/64
+#static routers=192.168.0.1
+#static domain_name_servers=192.168.0.1 8.8.8.8 fd51:42f8:caae:d92e::1
+
+# It is possible to fall back to a static IP if DHCP fails:
+# define static profile
+#profile static_eth0
+#static ip_address=192.168.1.23/24
+#static routers=192.168.1.1
+#static domain_name_servers=192.168.1.1
+
+# fallback to static profile on eth0
+#interface eth0
+#fallback static_eth0
+#
+#
+interface wlan0
+static ip_address=192.168.45.1/24
+static routers=192.168.45.1

config/ap/etc/dnsmasq.conf

@@ -0,0 +1,5 @@
+interface=wlan0				# Listening interface
+dhcp-range=192.168.45.10,192.168.45.20,255.255.255.0,24h	# Pool of IP addresses for wireless clients
+domain=wlan				# Domain
+address=/gw.wlan/192.168.45.1		# Alias for router
+

config/ap/etc/hostapd.conf

@@ -0,0 +1,8 @@
+country_code=GB
+interface=wlan0
+ssid=AGENT_GSM
+hw_mode=g
+channel=7
+macaddr_acl=0
+auth_algs=1
+ignore_broadcast_ssid=0

config/ap/lib/systemd/system/dnsmasq.service

@@ -0,0 +1,31 @@
+[Unit]
+Description=dnsmasq - A lightweight DHCP and caching DNS server
+Requires=network.target
+Wants=network-online.target
+Before=nss-lookup.target
+After=network-online.target
+
+[Service]
+Type=forking
+PIDFile=/run/dnsmasq/dnsmasq.pid
+
+# Test the config file and refuse starting if it is not valid.
+ExecStartPre=/usr/sbin/dnsmasq --test
+
+# We run dnsmasq via the /etc/init.d/dnsmasq script which acts as a
+# wrapper picking up extra configuration files and then execs dnsmasq
+# itself, when called with the "systemd-exec" function.
+ExecStart=/etc/init.d/dnsmasq systemd-exec
+
+# The systemd-*-resolvconf functions configure (and deconfigure)
+# resolvconf to work with the dnsmasq DNS server. They're called like
+# this to get correct error handling (ie don't start-resolvconf if the 
+# dnsmasq daemon fails to start.
+ExecStartPost=/etc/init.d/dnsmasq systemd-start-resolvconf
+ExecStop=/etc/init.d/dnsmasq systemd-stop-resolvconf
+
+
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=multi-user.target

setup/setup_agent_gsm.sh

@@ -11,7 +11,7 @@ GIT_SOURCE=https://git.sevana.biz/public/agent_gsm
 
 # Install prerequisites
 sudo apt install --assume-yes git mc python3 sox vim libffi-dev screen python3-pip python3-numpy dnsmasq hostapd screen
-sudo pip3 install pyyaml sox pyrabbit soundfile dbus_python pexpect requests rabbitpy bottle --break-system-packages
+sudo pip3 install pyyaml sox pyrabbit soundfile dbus_python pexpect requests rabbitpy bottle
 
 if [ -f "$INSTALL_DIR" ]; then
     rm -rf "$INSTALL_DIR"

src/bt_phone_test.py

@@ -1,44 +0,0 @@
-#!/usr/bin/python3
-
-import bt_phone
-import bt_controller
-import time
-
-EXIT_OK = 0
-EXIT_ERROR = 1
-
-PHONE_BT_MAC = '40:B0:76:B4:36:98'
-
-
-# Connection to phone
-
-bluetooth_ctl = bt_controller.Bluetoothctl()
-devices = bluetooth_ctl.get_paired_devices()
-print(f'Paired devices: {devices}')
-
-# disconnect before connect
-bluetooth_ctl.disconnect( PHONE_BT_MAC )
-ret = bluetooth_ctl.connect( PHONE_BT_MAC )
-if ret == False: 
-    print(f'Connect to {PHONE_BT_MAC} failed')
-    exit(EXIT_ERROR)
-
-print(f'Connect to {PHONE_BT_MAC} success')
-
-# Call
-# Initialize phone - this brings Ofono via D-Bus
-phone = bt_phone.Phone()
-phone.setup_dbus_loop()
-phone.call_number('111222')
-
-# Wait 5 seconds
-time.sleep(5)
-
-# Just to be sure - finish the call
-phone.hangup_call()
-phone.quit_dbus_loop()
-
-# Disconnect BT transport from the phone
-bluetooth_ctl.disconnect(PHONE_BT_MAC)
-
-exit(EXIT_OK)