- changes for PipeWire and Debian Bookworm

config/ap/add_ap.sh

@@ -0,0 +1,7 @@
+#!/bin/bash
+#
+sudo nmcli con add con-name hotspot ifname wlan0 type wifi ssid "AGENT_GSM"
+#sudo nmcli con modify hotspot wifi-sec.key-mgmt wpa-psk
+#sudo nmcli con modify hotspot wifi-sec.psk "159357159357"
+sudo nmcli con modify hotspot 802-11-wireless.mode ap 802-11-wireless.band bg ipv4.method shared ipv6.method shared
+

config/ap/etc/default/hostapd

@@ -1,23 +0,0 @@
-# Defaults for hostapd initscript
-#
-# WARNING: The DAEMON_CONF setting has been deprecated and will be removed
-#          in future package releases.
-#
-# See /usr/share/doc/hostapd/README.Debian for information about alternative
-# methods of managing hostapd.
-#
-# Uncomment and set DAEMON_CONF to the absolute path of a hostapd configuration
-# file and hostapd will be started during system boot. An example configuration
-# file can be found at /usr/share/doc/hostapd/examples/hostapd.conf.gz
-#
-DAEMON_CONF="/etc/hostapd/hostapd.conf"
-
-# Additional daemon options to be appended to hostapd command:-
-# 	-d   show more debug messages (-dd for even more)
-# 	-K   include key data in debug messages
-# 	-t   include timestamps in some debug messages
-#
-# Note that -B (daemon mode) and -P (pidfile) options are automatically
-# configured by the init.d script and must not be added to DAEMON_OPTS.
-#
-#DAEMON_OPTS=""

config/ap/etc/dhcpcd.conf

@@ -1,64 +0,0 @@
-# A sample configuration for dhcpcd.
-# See dhcpcd.conf(5) for details.
-
-# Allow users of this group to interact with dhcpcd via the control socket.
-#controlgroup wheel
-
-# Inform the DHCP server of our hostname for DDNS.
-hostname
-
-# Use the hardware address of the interface for the Client ID.
-clientid
-# or
-# Use the same DUID + IAID as set in DHCPv6 for DHCPv4 ClientID as per RFC4361.
-# Some non-RFC compliant DHCP servers do not reply with this set.
-# In this case, comment out duid and enable clientid above.
-#duid
-
-# Persist interface configuration when dhcpcd exits.
-persistent
-
-# Rapid commit support.
-# Safe to enable by default because it requires the equivalent option set
-# on the server to actually work.
-option rapid_commit
-
-# A list of options to request from the DHCP server.
-option domain_name_servers, domain_name, domain_search, host_name
-option classless_static_routes
-# Respect the network MTU. This is applied to DHCP routes.
-option interface_mtu
-
-# Most distributions have NTP support.
-#option ntp_servers
-
-# A ServerID is required by RFC2131.
-require dhcp_server_identifier
-
-# Generate SLAAC address using the Hardware Address of the interface
-#slaac hwaddr
-# OR generate Stable Private IPv6 Addresses based from the DUID
-slaac private
-
-# Example static IP configuration:
-#interface eth0
-#static ip_address=192.168.0.10/24
-#static ip6_address=fd51:42f8:caae:d92e::ff/64
-#static routers=192.168.0.1
-#static domain_name_servers=192.168.0.1 8.8.8.8 fd51:42f8:caae:d92e::1
-
-# It is possible to fall back to a static IP if DHCP fails:
-# define static profile
-#profile static_eth0
-#static ip_address=192.168.1.23/24
-#static routers=192.168.1.1
-#static domain_name_servers=192.168.1.1
-
-# fallback to static profile on eth0
-#interface eth0
-#fallback static_eth0
-#
-#
-interface wlan0
-static ip_address=192.168.45.1/24
-static routers=192.168.45.1

config/ap/etc/dnsmasq.conf

@@ -1,5 +0,0 @@
-interface=wlan0				# Listening interface
-dhcp-range=192.168.45.10,192.168.45.20,255.255.255.0,24h	# Pool of IP addresses for wireless clients
-domain=wlan				# Domain
-address=/gw.wlan/192.168.45.1		# Alias for router
-

config/ap/etc/hostapd.conf

@@ -1,8 +0,0 @@
-country_code=GB
-interface=wlan0
-ssid=AGENT_GSM
-hw_mode=g
-channel=7
-macaddr_acl=0
-auth_algs=1
-ignore_broadcast_ssid=0

config/ap/lib/systemd/system/dnsmasq.service

@@ -1,31 +0,0 @@
-[Unit]
-Description=dnsmasq - A lightweight DHCP and caching DNS server
-Requires=network.target
-Wants=network-online.target
-Before=nss-lookup.target
-After=network-online.target
-
-[Service]
-Type=forking
-PIDFile=/run/dnsmasq/dnsmasq.pid
-
-# Test the config file and refuse starting if it is not valid.
-ExecStartPre=/usr/sbin/dnsmasq --test
-
-# We run dnsmasq via the /etc/init.d/dnsmasq script which acts as a
-# wrapper picking up extra configuration files and then execs dnsmasq
-# itself, when called with the "systemd-exec" function.
-ExecStart=/etc/init.d/dnsmasq systemd-exec
-
-# The systemd-*-resolvconf functions configure (and deconfigure)
-# resolvconf to work with the dnsmasq DNS server. They're called like
-# this to get correct error handling (ie don't start-resolvconf if the 
-# dnsmasq daemon fails to start.
-ExecStartPost=/etc/init.d/dnsmasq systemd-start-resolvconf
-ExecStop=/etc/init.d/dnsmasq systemd-stop-resolvconf
-
-
-ExecReload=/bin/kill -HUP $MAINPID
-
-[Install]
-WantedBy=multi-user.target

setup/setup_agent_gsm.sh

@@ -10,8 +10,8 @@ INSTALL_DIR=agent_gsm
 GIT_SOURCE=https://git.sevana.biz/public/agent_gsm
 
 # Install prerequisites
-sudo apt install --assume-yes git mc python3 sox vim libffi-dev screen python3-pip python3-numpy dnsmasq hostapd
-sudo pip3 install pyyaml sox pyrabbit soundfile dbus_python pexpect pydub requests rabbitpy pydub reachability bottle
+sudo apt install --assume-yes git mc python3 sox vim libffi-dev screen python3-pip python3-numpy dnsmasq hostapd screen
+sudo pip3 install pyyaml sox pyrabbit soundfile dbus_python pexpect requests rabbitpy bottle --break-system-packages
 
 if [ -f "$INSTALL_DIR" ]; then
     rm -rf "$INSTALL_DIR"
@@ -45,7 +45,7 @@ cp config/agent.in.yaml config/agent.yaml
 mkdir -p ~/.config/mc
 cp config/mc/ini ~/.config/mc
 
-# Replace the values
+# Replace the values - finish preparing the agent configuration file
 if [[ $BACKEND_URL != "" ]]; then
   sed -i "s|BACKEND|$BACKEND|" config/agent.yaml
 fi
@@ -56,11 +56,45 @@ fi
 
 sed -i "s|TASK_NAME|$TASK_NAME|" config/agent.yaml
 
-# Update systemD unit file
-cp config/systemd/agent_gsm.in.service config/systemd/agent_gsm.service
 ABSOLUTE_INSTALL_DIR=`realpath .`
 
-sed -i "s|ABSOLUTE_INSTALL_DIR|$ABSOLUTE_INSTALL_DIR|" config/systemd/agent_gsm.service
+# Update systemD unit file
+# cp config/systemd/agent_gsm.in.service config/systemd/agent_gsm.service
+# sed -i "s|ABSOLUTE_INSTALL_DIR|$ABSOLUTE_INSTALL_DIR|" config/systemd/agent_gsm.service
+
+install_ap() {
+  # $1 is AP name
+  sudo cp $ABSOLUTE_INSTALL_DIR/config/ap/etc/dhcpcd.conf /etc
+  sudo cp $ABSOLUTE_INSTALL_DIR/config/ap/etc/dnsmasq.conf /etc
+  sudo mkdir -p /etc/hostapd
+  sudo cp $ABSOLUTE_INSTALL_DIR/config/ap/etc/hostapd.conf /etc/hostapd
+  sudo sed -i "s|AGENT_GSM|$1|" /etc/hostapt/hostapd.conf
+  sudo cp $ABSOLUTE_INSTALL_DIR/config/ap/etc/default/hostapt /etd/default
+  sudo systemctl enable dnsmasq
+  sudo systemctl enable hostapd
+  sudo systemctl start dnsmasq
+  sudo systemctl start hostapd
+}
+
+function enable_autologin() {
+  sudo systemctl --quiet set-default multi-user.target
+  sudo cat > /etc/systemd/system/getty@tty1.service.d/autologin.conf << EOF
+[Service]
+ExecStart=
+ExecStart=-/sbin/agetty --autologin $USER --noclear %I \$TERM
+EOF
+
+}
+
+# ToDo:
+# - allow autologin in console mode for 'pi' user
+enable_autologin
+
+# - add $ABSOLUTE_INSTALL_DIR/run_agent_screen.sh to ~/.bashrc
+echo "$ABSOLUTE_INSTALL_DIR/run_agent_screen.sh" >> ~/.bashrc
+
+# - install wifi AP with name $PHONE_NAME
+install_ap $PHONE_NAME
 
 echo "Now the remaining prerequisites will be installed and system will reboot."
 echo "You can connect the phone via Bluetooth after the reboot." 

src/bt_phone_test.py

@@ -0,0 +1,44 @@
+#!/usr/bin/python3
+
+import bt_phone
+import bt_controller
+import time
+
+EXIT_OK = 0
+EXIT_ERROR = 1
+
+PHONE_BT_MAC = '40:B0:76:B4:36:98'
+
+
+# Connection to phone
+
+bluetooth_ctl = bt_controller.Bluetoothctl()
+devices = bluetooth_ctl.get_paired_devices()
+print(f'Paired devices: {devices}')
+
+# disconnect before connect
+bluetooth_ctl.disconnect( PHONE_BT_MAC )
+ret = bluetooth_ctl.connect( PHONE_BT_MAC )
+if ret == False: 
+    print(f'Connect to {PHONE_BT_MAC} failed')
+    exit(EXIT_ERROR)
+
+print(f'Connect to {PHONE_BT_MAC} success')
+
+# Call
+# Initialize phone - this brings Ofono via D-Bus
+phone = bt_phone.Phone()
+phone.setup_dbus_loop()
+phone.call_number('111222')
+
+# Wait 5 seconds
+time.sleep(5)
+
+# Just to be sure - finish the call
+phone.hangup_call()
+phone.quit_dbus_loop()
+
+# Disconnect BT transport from the phone
+bluetooth_ctl.disconnect(PHONE_BT_MAC)
+
+exit(EXIT_OK)